summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--_ont/ont-carlitoxxpro-cpgos03-0490-v2.md5
-rw-r--r--_ont/ont-leox-lxt-010g-d.md7
-rw-r--r--_ont/ont-leox-lxt-010h-d.md7
-rw-r--r--_ont/ont-leox-lxt-010s-h.md8
-rw-r--r--_ont/ont-luna-sdk-useful-commands.md24
-rw-r--r--_ont/ont-odi-realtek-dfp-34g-2c2.md8
-rw-r--r--_ont/ont-odi-realtek-dfp-34x-2c2.md8
-rw-r--r--_ont/ont-t-w-twcgpon657.md7
-rw-r--r--_ont/ont-technicolor-afm0002.md14
-rw-r--r--_ont/ont-technicolor-afm0003.md9
-rw-r--r--_ont/ont-vsol-v2801f.md7
11 files changed, 86 insertions, 18 deletions
diff --git a/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md b/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md
index 2f10493..ed5d0bf 100644
--- a/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md
+++ b/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md
@@ -30,7 +30,10 @@ parent: CarlitoxxPro
- You should use the VID/VLAN shown by executing the command `omcicli mib get 84` via telnet to bring up PPPoE
-{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='asciiAndHex' %}
+{% include_relative ont-luna-sdk-useful-commands.md
+ flash='flash'
+ ploam='asciiAndHex'
+%}
# Miscellaneous Links
diff --git a/_ont/ont-leox-lxt-010g-d.md b/_ont/ont-leox-lxt-010g-d.md
index 02da189..ef8b272 100644
--- a/_ont/ont-leox-lxt-010g-d.md
+++ b/_ont/ont-leox-lxt-010g-d.md
@@ -30,4 +30,9 @@ parent: LEOX
The ONT has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the top surface.
-{% include_relative ont-luna-sdk-useful-commands.md ploam='ascii' flash='/etc/scripts/flash' %}
+{% include_relative ont-luna-sdk-useful-commands.md
+ ploam='ascii'
+ flash='/etc/scripts/flash'
+ customSwVersionAlert='This needs the `OMCI_OLT_MODE` value to be set to `21`. This will force to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`.'
+ omciOLT21='true'
+%}
diff --git a/_ont/ont-leox-lxt-010h-d.md b/_ont/ont-leox-lxt-010h-d.md
index f88b9fb..2d9ffda 100644
--- a/_ont/ont-leox-lxt-010h-d.md
+++ b/_ont/ont-leox-lxt-010h-d.md
@@ -70,6 +70,11 @@ This ONT supports dual boot.
{% include alert.html content="Before proceed on any modification, make a backup of files rtl8290b.data and europa.data from /var/config folder. These files include optical calibration of your ONT's laser, if you accidentally delete or ruin them, your ONT will be unusable" alert="Note" icon="svg-warning" color="yellow" %}
-{% include_relative ont-luna-sdk-useful-commands.md ploam='ascii' flash='/etc/scripts/flash' customSwVersionAlert='This needs the OMCI_OLT_MODE value to be set to 21' omciOLT21='true' %}
+{% include_relative ont-luna-sdk-useful-commands.md
+ ploam='ascii'
+ flash='/etc/scripts/flash'
+ customSwVersionAlert='This needs the `OMCI_OLT_MODE` value to be set to `21`. This will force to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`.'
+ omciOLT21='true'
+%}
diff --git a/_ont/ont-leox-lxt-010s-h.md b/_ont/ont-leox-lxt-010s-h.md
index 533939d..fffbf10 100644
--- a/_ont/ont-leox-lxt-010s-h.md
+++ b/_ont/ont-leox-lxt-010s-h.md
@@ -68,7 +68,13 @@ The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be a
- V3.3.4L4rc1 (Fix 2.5GbE HiSGMII)
- V3.3.4L4rc5
-{% include_relative ont-luna-sdk-useful-commands.md ploam='ascii' speedLan='178' customSpeedLanAlert='You need firmware `V3.3.4L4rc1` or higher. Before editing the speed make sure your hardware supports it. If you try to use any mode not listed here, stick will default to mode 1.' flash='/etc/scripts/flash' customSwVersionAlert='This needs the OMCI_OLT_MODE value to be set to 21' omciOLT21='true' %}
+{% include_relative ont-luna-sdk-useful-commands.md
+ ploam='ascii'
+ speedLan='18'
+ customSpeedLanAlert='You need firmware `V3.3.4L4rc1` or higher. Before editing the speed make sure your hardware supports it. If you try to use any mode not listed here, stick will default to mode 1.'
+ flash='/etc/scripts/flash'
+ customSwVersionAlert='This needs the `OMCI_OLT_MODE` value to be set to `21`. This will force to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`.'
+ omciOLT21='true' %}
# Known Bugs
diff --git a/_ont/ont-luna-sdk-useful-commands.md b/_ont/ont-luna-sdk-useful-commands.md
index 40fac95..e48cda5 100644
--- a/_ont/ont-luna-sdk-useful-commands.md
+++ b/_ont/ont-luna-sdk-useful-commands.md
@@ -100,9 +100,13 @@ GPON_PLOAM_PASSWD=AAAAAAAAAA
## Getting/Setting OMCI software version (ME 7)
-{% assign customSwVersionAlert = include.customSwVersionAlert | default: "This needs the `OMCI_OLT_MODE` value to be set to 3" %}
+{% if include.customSwVersionAlert %}
+
+{% assign customSwVersionAlert = include.customSwVersionAlert %}
{% include alert.html content=customSwVersionAlert alert="Note" icon="svg-info" color="blue" %}
+{% endif %}
+
{% if include.flashSwVersion %}
```sh
# {{ include.flash }} get OMCI_SW_VER1
@@ -121,9 +125,13 @@ OMCI_SW_VER1=YOURSECONDSWVER
## Getting/Setting OMCI hardware version (ME 256)
-{% assign customHwVersionAlert = include.customHwVersionAlert | default: "This needs the `OMCI_OLT_MODE` value to be set to 3" %}
+{% if include.customHwVersionAlert %}
+
+{% assign customHwVersionAlert = include.customHwVersionAlert %}
{% include alert.html content=customHwVersionAlert alert="Note" icon="svg-info" color="blue" %}
+{% endif %}
+
```sh
# {{ include.flash }} get HW_HWVER
HW_HWVER=V2.0
@@ -132,9 +140,13 @@ HW_HWVER=V2.0
## Getting/Setting OMCI vendor ID (ME 256)
-{% assign customVendorAlert = include.customVendorAlert | default: "This needs the `OMCI_OLT_MODE` value to be set to 3" %}
+{% if include.customVendorAlert %}
+
+{% assign customVendorAlert = include.customVendorAlert %}
{% include alert.html content=customVendorAlert alert="Note" icon="svg-info" color="blue" %}
+{% endif %}
+
```sh
# {{ include.flash }} get PON_VENDOR_ID
PON_VENDOR_ID=ZTEG
@@ -143,9 +155,13 @@ PON_VENDOR_ID=ZTEG
## Getting/Setting OMCI equipment ID (ME 257)
-{% assign customEquipAlert = include.customEquipAlert | default: "This needs the `OMCI_OLT_MODE` value to be set to 3" %}
+{% if include.customEquipAlert %}
+
+{% assign customEquipAlert = include.customEquipAlert %}
{% include alert.html content=customEquipAlert alert="Note" icon="svg-info" color="blue" %}
+{% endif %}
+
```sh
# {{ include.flash }} get GPON_ONU_MODEL
GPON_ONU_MODEL=DFP-34X-2C2
diff --git a/_ont/ont-odi-realtek-dfp-34g-2c2.md b/_ont/ont-odi-realtek-dfp-34g-2c2.md
index 9b43409..efbe6b6 100644
--- a/_ont/ont-odi-realtek-dfp-34g-2c2.md
+++ b/_ont/ont-odi-realtek-dfp-34g-2c2.md
@@ -70,7 +70,13 @@ The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be a
{% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %}
-{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='hex' customSwVersionAlert="This needs the `OMCI_OLT_MODE` value to be set to 3 and firmware 220530 or 220923 modded by @stich86 or if you don't want to replace firmware to change software version, set `OMCI_OLT_MODE` value to `21`. This will force to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`" speedLan='1234567' omciOLT21='true' %}
+{% include_relative ont-luna-sdk-useful-commands.md
+ flash='flash'
+ ploam='hex'
+ customSwVersionAlert="This needs the `OMCI_OLT_MODE` value to be set to 3 and firmware 220530 or 220923 modded by @stich86 or if you don't want to replace firmware to change software version, set `OMCI_OLT_MODE` value to `21`. This will force to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`."
+ speedLan='1234567'
+ omciOLT21='true'
+%}
# Known Bugs
diff --git a/_ont/ont-odi-realtek-dfp-34x-2c2.md b/_ont/ont-odi-realtek-dfp-34x-2c2.md
index 5bafd9e..579d734 100644
--- a/_ont/ont-odi-realtek-dfp-34x-2c2.md
+++ b/_ont/ont-odi-realtek-dfp-34x-2c2.md
@@ -79,7 +79,13 @@ The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be a
{% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %}
-{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='hex' customSwVersionAlert="This needs the `OMCI_OLT_MODE` value to be set to 3 and firmware 220530 or 220923 modded by @stich86 or if you don't want to replace firmware to change software version, set `OMCI_OLT_MODE` value to `21`. This will force to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`" speedLan='1234567' omciOLT21='true' %}
+{% include_relative ont-luna-sdk-useful-commands.md
+ flash='flash'
+ ploam='hex'
+ customSwVersionAlert="This needs the `OMCI_OLT_MODE` value to be set to 3 and firmware 220530 or 220923 modded by @stich86 or if you don't want to replace firmware to change software version, set `OMCI_OLT_MODE` value to `21`. This will force to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`."
+ speedLan='1234567'
+ omciOLT21='true'
+%}
# Known Bugs
diff --git a/_ont/ont-t-w-twcgpon657.md b/_ont/ont-t-w-twcgpon657.md
index a92287d..b1dc00f 100644
--- a/_ont/ont-t-w-twcgpon657.md
+++ b/_ont/ont-t-w-twcgpon657.md
@@ -36,7 +36,12 @@ parent: T&W
The reccomended version are `C00R657V2801F_V1.9.0-220404.tar` because it is the V2801F firmware for T&W TWC GPON657.
-{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='ascii' speedLan='12345' customSpeedLanAlert='Please use recommended version `C00R657V2801F_V1.9.0-220404.tar`. Before editing the speed make sure your hardware supports it.' %}
+{% include_relative ont-luna-sdk-useful-commands.md
+ flash='flash'
+ ploam='ascii'
+ speedLan='123456'
+ customSpeedLanAlert='Please use recommended version `C00R657V2801F_V1.9.0-220404.tar`. With other firmware it is not guaranteed that `LAN_SDS_MODE` other than `1` will work. Before editing the speed make sure your hardware supports it.'
+%}
# Known Bugs
diff --git a/_ont/ont-technicolor-afm0002.md b/_ont/ont-technicolor-afm0002.md
index 245dfb8..adc2482 100644
--- a/_ont/ont-technicolor-afm0002.md
+++ b/_ont/ont-technicolor-afm0002.md
@@ -82,11 +82,15 @@ This stick supports dual boot.
`k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and firmware of the second one
-{% include_relative ont-luna-sdk-useful-commands.md flash='/etc/scripts/flash' ploam='ascii' lastgoodHs=true flashSwVersion=true
-customSwVersionAlert="This needs the `/etc/scripts/flash` modded"
-customHwVersionAlert="This needs the `/etc/scripts/flash` modded"
-customVendorAlert="This needs the `/etc/scripts/flash` modded"
-customEquipAlert="This needs the `/etc/scripts/flash` modded"
+{% include_relative ont-luna-sdk-useful-commands.md
+ flash='/etc/scripts/flash'
+ ploam='ascii'
+ lastgoodHs=true
+ flashSwVersion=true
+ customSwVersionAlert="This needs the `/etc/scripts/flash` modded"
+ customHwVersionAlert="This needs the `/etc/scripts/flash` modded"
+ customVendorAlert="This needs the `/etc/scripts/flash` modded"
+ customEquipAlert="This needs the `/etc/scripts/flash` modded"
%}
## Enabling the Web UI
diff --git a/_ont/ont-technicolor-afm0003.md b/_ont/ont-technicolor-afm0003.md
index 2098bf8..7a44ab2 100644
--- a/_ont/ont-technicolor-afm0003.md
+++ b/_ont/ont-technicolor-afm0003.md
@@ -70,7 +70,14 @@ This stick supports dual boot.
`k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and firmware of the second one
-{% include_relative ont-luna-sdk-useful-commands.md flash='/etc/scripts/flash' ploam='ascii' speedLan='12345' customSpeedLanAlert='The defualt firmware does not allow modification of the `LAN_SDS_MODE` parameter. Is it necessary to use the modded firmware. Before editing the speed make sure your hardware supports it.' lastgoodHs=true flashSwVersion=true %}
+{% include_relative ont-luna-sdk-useful-commands.md
+ flash='/etc/scripts/flash'
+ ploam='ascii'
+ speedLan='123456'
+ customSpeedLanAlert='The defualt firmware does not allow modification of the `LAN_SDS_MODE` parameter. Is it necessary to use the modded firmware. Before editing the speed make sure your hardware supports it.'
+ lastgoodHs=true
+ flashSwVersion=true
+%}
## Enabling the Web UI
```sh
diff --git a/_ont/ont-vsol-v2801f.md b/_ont/ont-vsol-v2801f.md
index fdc2b60..c87de37 100644
--- a/_ont/ont-vsol-v2801f.md
+++ b/_ont/ont-vsol-v2801f.md
@@ -35,7 +35,12 @@ parent: VSOL
The reccomended version are `V2801F_V1.9.0-220425.tar` because it has Modern WebGUI, 2.5GbE, patched `runlansds.sh`, `tftpd`, ...
-{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='ascii' speedLan='12345' customSpeedLanAlert='Please use recommended version `V2801F_V1.9.0-220425.tar`. Before editing the speed make sure your hardware supports it.' %}
+{% include_relative ont-luna-sdk-useful-commands.md
+ flash='flash'
+ ploam='ascii'
+ speedLan='123456'
+ customSpeedLanAlert='Please use recommended version `V2801F_V1.9.0-220425.tar`. With other firmware it is not guaranteed that `LAN_SDS_MODE` other than `1` will work. Before editing the speed make sure your hardware supports it.'
+%}
# Known Bugs
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 04:10:23 +0100