diff options
Diffstat (limited to '_ont/ont-huawei-ma5671a-carlito.md')
| -rw-r--r-- | _ont/ont-huawei-ma5671a-carlito.md | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/_ont/ont-huawei-ma5671a-carlito.md b/_ont/ont-huawei-ma5671a-carlito.md index afaef44..cc54827 100644 --- a/_ont/ont-huawei-ma5671a-carlito.md +++ b/_ont/ont-huawei-ma5671a-carlito.md @@ -5,7 +5,7 @@ parent: Huawei MA5671A layout: default --- -{% include alert.html content="Be careful, back up the goi_config from uboot before changing firmware." alert="Info" icon="svg-info" color="blue" %} +{% include alert.html content="Be careful, backup goi_config from uboot before changing the firmware." alert="Info" icon="svg-info" color="blue" %} # GPON ONU status @@ -13,27 +13,27 @@ layout: default ```sh omci_pipe.sh meg MIB_IDX ME_IN ``` -Where `MIB_IDX` is the MIB ID and the `ME_IN` is the ME instance number +Where `MIB_IDX` is the MIB ID and `ME_IN` is the ME instance number ## Getting/Setting Speed LAN Mode -To enable the 2.5 Gbps / HSGMII with auto-neg on: +To enable the interface to sync at 2.5 Gbps / using HSGMII with auto-neg on: ```sh fw_setenv sgmii_mode 5 ``` -To remove the value (back to default): +To revert the afore-mentioned command: ```sh fw_setenv sgmii_mode ``` -To get the LAN Mode: +To check the set value fo the LAN Mode: ```sh onu lanpsg 0 ``` -The `link_status` variable tells the current speed +The `link_status` variable tells the current speed: | Value (for `sgmii_mode` and `link_status`) | Speed | | ------------------------------------------ | ---------------------------------- | |