From 926eace7de458a0fe69934d5f9da6f4bfbd04e26 Mon Sep 17 00:00:00 2001 From: Giammarco Date: Thu, 7 Sep 2023 18:32:37 +0200 Subject: Update LEOX info (#267) * Update ont-leox-lxt-010s-h.md * Update ont-leox-lxt-010h-d.md * Update ont-leox-lxt-010h-d.md * Update ont-leox-lxt-010s-h.md --- _ont/ont-leox-lxt-010s-h.md | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to '_ont/ont-leox-lxt-010s-h.md') diff --git a/_ont/ont-leox-lxt-010s-h.md b/_ont/ont-leox-lxt-010s-h.md index dd0f632..533939d 100644 --- a/_ont/ont-leox-lxt-010s-h.md +++ b/_ont/ont-leox-lxt-010s-h.md @@ -66,9 +66,10 @@ The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be a - V3.3.4L3 - V3.3.4L4rc1 (Fix 2.5GbE HiSGMII) +- V3.3.4L4rc5 -{% include_relative ont-luna-sdk-useful-commands.md ploam='ascii' speedLan='178' customSpeedLanAlert='You need firmware `V3.3.4L4rc1` or higher. Before editing the speed make sure your hardware supports it. If you try to use any mode not listed here, stick will default to mode 1.' flash='/etc/scripts/flash' %} +{% include_relative ont-luna-sdk-useful-commands.md ploam='ascii' speedLan='178' customSpeedLanAlert='You need firmware `V3.3.4L4rc1` or higher. Before editing the speed make sure your hardware supports it. If you try to use any mode not listed here, stick will default to mode 1.' flash='/etc/scripts/flash' customSwVersionAlert='This needs the OMCI_OLT_MODE value to be set to 21' omciOLT21='true' %} # Known Bugs -The stock firmware doesn't work @ 2.5GbE. There is a new firmware avaliable from LeoLabs that fixes this issue. \ No newline at end of file +The stock firmware doesn't work @ 2.5GbE. There is a new firmware avaliable from LeoLabs that fixes this issue. -- cgit v1.2.3