blob: 74730da53796a707d7252a11589bae2c29148d92 (
plain) (
blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
|
---
title: ODI DFP-34X-C2C
has_children: false
parent: ONT
---
# Hardware Specifications
| | |
| ----------- | ---------------- |
| Vendor | ODI |
| Model | DFP-34X-C2C |
| Chipset | Realtek RTL9601D |
| Flash | 8 MB |
| RAM | 64 MB |
| System | Linux (Luna SDK) |
| HSGMII | Yes |
| Optics | SC/APC |
| IP address | 192.168.1.1 |
| Web Gui | ✅ admin/admin |
| SSH | ✅ admin/admin |
| Form Factor | miniONT SFP |
**Note:** SSH uses an outdated set of algorithm/ciphers, you can connect using the following command:
```shell
ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -oCiphers=+3des-cbc admin@192.168.1.1
```
{% include image.html file="odi.jpg" alt="ODI DFP-34X-C2C" caption="ODI DFP-34X-C2C" %}
## Firmware is interchangeable with:
- [ODI DFP-34X-C2C](ont-ODI-DFP-34X-C2C)
- [VSOL V2801F](ont-vsol-V2801F)
- [TWCGPON657](ont-TWCGPON657)
- [UFiber UF-Instant](ont-UFiber-UF-Instant)
- [DFP-34X-2C2](ont-DFP-34X-2C2)
- [CarlitoxxPro CPGOS03-0490 v2](ont-CarlitoxxPro-CPGOS03-0490-v2)
## List of software versions
- V1.0-220530 Modded by [stich86](https://github.com/stich86) **SUGGESTED** since it has working VLAN translation. Download link: [github.com](https://github.com/Anime4000/RTL960x/files/8821809/M114_sfp_ODI_hybrid_220527_stich86_220530.tar.zip)
- V1.0-220414
- V1.0-220304
## List of partitions
| dev | size | erasesize | name |
| ----- | -------- | --------- | --------------- |
| mtd0 | 00040000 | 00001000 | "boot" |
| mtd1 | 00002000 | 00001000 | "env" |
| mtd2 | 00002000 | 00001000 | "env2" |
| mtd3 | 0003c000 | 00001000 | "config" |
| mtd4 | 0014c000 | 00001000 | "k0" |
| mtd5 | 00274000 | 00001000 | "r0" |
| mtd6 | 0014c000 | 00001000 | "k1" |
| mtd7 | 00274000 | 00001000 | "r1" |
| mtd8 | 00001000 | 00001000 | "Partition_008" |
| mtd9 | 00001000 | 00001000 | "Partition_009" |
| mtd10 | 00001000 | 00001000 | "Partition_010" |
| mtd11 | 00001000 | 00001000 | "Partition_011" |
| mtd12 | 0014c000 | 00001000 | "linux" |
| mtd13 | 00274000 | 00001000 | "rootfs" |
This stick supports dual boot.
`k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and the firmware of the second one
# Useful Commands
## Getting/Setting the ONT's S/N
```sh
# flash get GPON_SN
GPON_SN=TMBB00000000
# flash set GPON_SN TMBB0A1B2C3D
```
## Getting/Setting the ONT's PLOAM password
{% include alert.html content="The PLOAM password is stored in HEX format, with no 0x or separator" %}
```sh
# flash get GPON_PLOAM_PASSWD
GPON_PLOAM_PASSWD=41414141414141414141
# flash set GPON_PLOAM_PASSWD 41414141414141414141
```
## Getting/Setting the ONT Vendor ID
**Note:** this may need OMCI_OLT_MODE set to 3 to work
```sh
# flash get PON_VENDOR_ID
PON_VENDOR_ID=ZTEG
# flash set PON_VENDOR_ID HWTC
```
## Getting/Settng the ONT Custom software version
**Note:** this needs OMCI_OLT_MODE set to 3 and firmware 220530 modded by stich86
```sh
# nv setenv sw_custom_version0 YOURFIRSTSWVER
# nv setenv sw_custom_version1 YOURSECONDSWVER
```
## Getting/Setting a custom HW Version
**Note:** this probably needs OMCI_OLT_MODE set to 3
```sh
# flash get HW_HWVER
HW_HWVER=V2.0
# flash set HW_HWVER MYHWVERSION
```
## Getting/Setting a custom ONT Equipment ID
**Note:** this probably needs OMCI_OLT_MODE set to 3
```sh
# flash get GPON_ONU_MODEL
GPON_ONU_MODEL=DFP-34X-2C2
# flash set GPON_ONU_MODEL DFP-34X-XXX
```
## Checking the currently active image
```sh
# nv getenv sw_active
sw_active=1
```
## Booting to a different image
```sh
# nv setenv sw_commit 0|1
# reboot
```
## Querying a particular OMCI ME
```sh
# omcicli mib get MIB_IDX
```
# Known Bugs
- Auto-sensing mode to switch between SGMII/HiSGMII
# Miscellaneous Links
- [Hacking RTL960x](https://github.com/Anime4000/RTL960x)
|
