From 3129c8187231945450d295ccfe149c1367532a43 Mon Sep 17 00:00:00 2001 From: krakenrf <78108016+krakenrf@users.noreply.github.com> Date: Thu, 15 Sep 2022 16:48:15 +1200 Subject: Updated 02. Direction Finding Quickstart Guide (markdown) --- 02.-Direction-Finding-Quickstart-Guide.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to '02.-Direction-Finding-Quickstart-Guide.md') diff --git a/02.-Direction-Finding-Quickstart-Guide.md b/02.-Direction-Finding-Quickstart-Guide.md index fa1eb48..26f1535 100644 --- a/02.-Direction-Finding-Quickstart-Guide.md +++ b/02.-Direction-Finding-Quickstart-Guide.md @@ -48,7 +48,7 @@ The next step is to burn the KrakenSDR Direction Finding (DF) image to an SD Car 1. Using a PC, download the “Etcher” software from [balena.io/etcher](https://www.balena.io/etcher/). 2. Download the latest KrakenSDR image zip file from the [Releases page](https://github.com/krakenrf/krakensdr_doa/releases) in this repository, or via the links in the repository README. -3. Use [Balena Etcher](https://www.balena.io/etcher/) to burn the image onto the SD Card. Using Etcher you can burn directly from the ZIP file. (There was a report that Etcher does not work on MacOS, you can try [Raspberry Pi's Imager](https://www.raspberrypi.com/software/) instead) +3. Use [Balena Etcher](https://www.balena.io/etcher/) to burn the image onto the SD Card. Using Etcher you can burn directly from the ZIP file. (There was a report that Etcher does not properly work on MacOS, MacOS users can try [Raspberry Pi's Imager](https://www.raspberrypi.com/software) instead) 4. Insert the card into your Raspberry Pi 4. Note that USB-boot cannot be used. The reason is that the USB drive interferes with the KrakenSDR USB connection and can cause a loss of samples, which results in a loss of sample coherence. -- cgit v1.2.3