From b1f9e28cd155459ab2843690c248ed9f4767bc3f Mon Sep 17 00:00:00 2001 From: Fire-Head Date: Sun, 2 Jun 2019 06:00:38 +0300 Subject: skeleton updated, windows specific stuff added --- dxsdk/Include/evcode.h | 428 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 428 insertions(+) create mode 100644 dxsdk/Include/evcode.h (limited to 'dxsdk/Include/evcode.h') diff --git a/dxsdk/Include/evcode.h b/dxsdk/Include/evcode.h new file mode 100644 index 00000000..32cc1958 --- /dev/null +++ b/dxsdk/Include/evcode.h @@ -0,0 +1,428 @@ +//------------------------------------------------------------------------------ +// File: EvCode.h +// +// Desc: List of standard Quartz event codes and the expected params. +// +// Copyright (c) 1992 - 2001, Microsoft Corporation. All rights reserved. +//------------------------------------------------------------------------------ + + +// Event codes are broken into two groups +// -- system event codes +// -- extension event codes +// All system event codes are below EC_USER + +#define EC_SYSTEMBASE 0x00 +#define EC_USER 0x8000 + +// System-defined event codes +// ========================== +// +// There are three types of system-defined event codes: +// +// 1. Those which are always passed through to the application +// (To be collected by calls to GetEvent or within WaitForCompletion.) +// (e.g. EC_ERRORABORT, EC_USERABORT.) +// +// 2. Those which are pure internal and will never be passed to +// the application. (e.g. EC_SHUTDOWN) +// +// 3. Those which have default handling. Default handing implies that +// the event is not passed to the application. However, default +// handling may be canceled by calling +// IMediaEvent::CancelDefaultHandling. If the default handling is +// cancelled in this way, then the message will be delivered to the +// application and the application must action it appropriately. +// Default handling can be restored by calling RestoreDefaultHandling. +// +// We will refer to these events as application, internal and defaulted +// events respectively. +// +// System-defined events may have interface pointers, BSTR's, etc passed +// as parameters. It is therefore essential that, for any message +// retrieved using GetEvent, a matching call to FreeEventParams is made +// to ensure that relevant interfaces are released and storage freed. +// Failure to call FreeEventParams will result in memory leaks, if not +// worse. +// +// Filters sending these messages to the filter graph should not AddRef() +// any interfaces that they may pass as parameters. The filter graph +// manager will AddRef them if required. E.g. if the event is to be queued +// for the application or queued to a worker thread. + +// Each event listed below is immediately followed by a parameter list +// detailing the types of the parameters associated with the message, +// and an indication of whether the message is an application, internal +// or defaulted message. This is then followed by a short description. +// The use of "void" in the parameter list implies that the parameter is not +// used. Such parameters should be zero. + +// Other defined EC_ regions: +// DVD event codes 0x0100 - 0x0150 (dvdevcod.h) +// audio device event codes 0x0200 - 0x0250 (audevcod.h) +// WindowsMedia SDK-originated events 0x0251 - 0x0300 (see below) +// MSVIDCTL 0x0301 - 0x0325 (msvidctl.idl) +// stream buffer engine (PVR) 0x0326 - 0x0350 (sbe.idl) + +#define EC_COMPLETE 0x01 +// ( HRESULT, void ) : defaulted (special) +// Signals the completed playback of a stream within the graph. This message +// is sent by renderers when they receive end-of-stream. The default handling +// of this message results in a _SINGLE_ EC_COMPLETE being sent to the +// application when ALL of the individual renderers have signaled EC_COMPLETE +// to the filter graph. If the default handing is canceled, the application +// will see all of the individual EC_COMPLETEs. + + +#define EC_USERABORT 0x02 +// ( void, void ) : application +// In some sense, the user has requested that playback be terminated. +// This message is typically sent by renderers that render into a +// window if the user closes the window into which it was rendering. +// It is up to the application to decide if playback should actually +// be stopped. + + +#define EC_ERRORABORT 0x03 +// ( HRESULT, void ) : application +// Operation aborted because of error + + +#define EC_TIME 0x04 +// ( DWORD, DWORD ) : application +// The requested reference time occurred. (This event is currently not used). +// lParam1 is low dword of ref time, lParam2 is high dword of reftime. + + +#define EC_REPAINT 0x05 +// ( IPin * (could be NULL), void ) : defaulted +// A repaint is required - lParam1 contains the (IPin *) that needs the data +// to be sent again. Default handling is: if the output pin which the IPin is +// attached to supports the IMediaEventSink interface then it will be called +// with the EC_REPAINT first. If that fails then normal repaint processing is +// done by the filter graph. + + +// Stream error notifications +#define EC_STREAM_ERROR_STOPPED 0x06 +#define EC_STREAM_ERROR_STILLPLAYING 0x07 +// ( HRESULT, DWORD ) : application +// lParam 1 is major code, lParam2 is minor code, either may be zero. + + +#define EC_ERROR_STILLPLAYING 0x08 +// ( HRESULT, void ) : application +// The filter graph manager may issue Run's to the graph asynchronously. +// If such a Run fails, EC_ERROR_STILLPLAYING is issued to notify the +// application of the failure. The state of the underlying filters +// at such a time will be indeterminate - they will all have been asked +// to run, but some are almost certainly not. + + +#define EC_PALETTE_CHANGED 0x09 +// ( void, void ) : application +// notify application that the video palette has changed + + +#define EC_VIDEO_SIZE_CHANGED 0x0A +// ( DWORD, void ) : application +// Sent by video renderers. +// Notifies the application that the native video size has changed. +// LOWORD of the DWORD is the new width, HIWORD is the new height. + + +#define EC_QUALITY_CHANGE 0x0B +// ( void, void ) : application +// Notify application that playback degradation has occurred + + +#define EC_SHUTTING_DOWN 0x0C +// ( void, void ) : internal +// This message is sent by the filter graph manager to any plug-in +// distributors which support IMediaEventSink to notify them that +// the filter graph is starting to shutdown. + + +#define EC_CLOCK_CHANGED 0x0D +// ( void, void ) : application +// Notify application that the clock has changed. +// (i.e. SetSyncSource has been called on the filter graph and has been +// distributed successfully to the filters in the graph.) + + +#define EC_PAUSED 0x0E +// ( HRESULT, void ) : application +// Notify application the previous pause request has completed + + +#define EC_OPENING_FILE 0x10 +#define EC_BUFFERING_DATA 0x11 +// ( BOOL, void ) : application +// lParam1 == 1 --> starting to open file or buffer data +// lParam1 == 0 --> not opening or buffering any more +// (This event does not appear to be used by ActiveMovie.) + + +#define EC_FULLSCREEN_LOST 0x12 +// ( void, IBaseFilter * ) : application +// Sent by full screen renderers when switched away from full screen. +// IBaseFilter may be NULL. + + +#define EC_ACTIVATE 0x13 +// ( BOOL, IBaseFilter * ) : internal +// Sent by video renderers when they lose or gain activation. +// lParam1 is set to 1 if gained or 0 if lost +// lParam2 is the IBaseFilter* for the filter that is sending the message +// Used for sound follows focus and full-screen switching + + +#define EC_NEED_RESTART 0x14 +// ( void, void ) : defaulted +// Sent by renderers when they regain a resource (e.g. audio renderer). +// Causes a restart by Pause/put_Current/Run (if running). + + +#define EC_WINDOW_DESTROYED 0x15 +// ( IBaseFilter *, void ) : internal +// Sent by video renderers when the window has been destroyed. Handled +// by the filter graph / distributor telling the resource manager. +// lParam1 is the IBaseFilter* of the filter whose window is being destroyed + + +#define EC_DISPLAY_CHANGED 0x16 +// ( IPin *, void ) : internal +// Sent by renderers when they detect a display change. the filter graph +// will arrange for the graph to be stopped and the pin send in lParam1 +// to be reconnected. by being reconnected it allows a renderer to reset +// and connect with a more appropriate format for the new display mode +// lParam1 contains an (IPin *) that should be reconnected by the graph + + +#define EC_STARVATION 0x17 +// ( void, void ) : defaulted +// Sent by a filter when it detects starvation. Default handling (only when +// running) is for the graph to be paused until all filters enter the +// paused state and then run. Normally this would be sent by a parser or source +// filter when too little data is arriving. + + +#define EC_OLE_EVENT 0x18 +// ( BSTR, BSTR ) : application +// Sent by a filter to pass a text string to the application. +// Conventionally, the first string is a type, and the second a parameter. + + +#define EC_NOTIFY_WINDOW 0x19 +// ( HWND, void ) : internal +// Pass the window handle around during pin connection. + +#define EC_STREAM_CONTROL_STOPPED 0x1A +// ( IPin * pSender, DWORD dwCookie ) +// Notification that an earlier call to IAMStreamControl::StopAt +// has now take effect. Calls to the method can be marked +// with a cookie which is passed back in the second parameter, +// allowing applications to easily tie together request +// and completion notifications. +// +// NB: IPin will point to the pin that actioned the Stop. This +// may not be the pin that the StopAt was sent to. + +#define EC_STREAM_CONTROL_STARTED 0x1B +// ( IPin * pSender, DWORD dwCookie ) +// Notification that an earlier call to IAMStreamControl::StartAt +// has now take effect. Calls to the method can be marked +// with a cookie which is passed back in the second parameter, +// allowing applications to easily tie together request +// and completion notifications. +// +// NB: IPin will point to the pin that actioned the Start. This +// may not be the pin that the StartAt was sent to. + +#define EC_END_OF_SEGMENT 0x1C +// +// ( const REFERENCE_TIME *pStreamTimeAtEndOfSegment, DWORD dwSegmentNumber ) +// +// pStreamTimeAtEndOfSegment +// pointer to the accumulated stream clock +// time since the start of the segment - this is directly computable +// as the sum of the previous and current segment durations (Stop - Start) +// and the rate applied to each segment +// The source add this time to the time within each segment to get +// a total elapsed time +// +// dwSegmentNumber +// Segment number - starts at 0 +// +// Notifies that a segment end has been reached when the +// AM_SEEKING_Segment flags was set for IMediaSeeking::SetPositions +// Passes in an IMediaSeeking interface to allow the next segment +// to be defined by the application + +#define EC_SEGMENT_STARTED 0x1D +// +// ( const REFERENCE_TIME *pStreamTimeAtStartOfSegment, DWORD dwSegmentNumber) +// +// pStreamTimeAtStartOfSegment +// pointer to the accumulated stream clock +// time since the start of the segment - this is directly computable +// as the sum of the previous segment durations (Stop - Start) +// and the rate applied to each segment +// +// dwSegmentNumber +// Segment number - starts at 0 +// +// Notifies that a new segment has been started. +// This is sent synchronously by any entity that will issue +// EC_END_OF_SEGMENT when a new segment is started +// (See IMediaSeeking::SetPositions - AM_SEEKING_Segment flag) +// It is used to compute how many EC_END_OF_SEGMENT notifications +// to expect at the end of a segment and as a consitency check + + +#define EC_LENGTH_CHANGED 0x1E +// (void, void) +// sent to indicate that the length of the "file" has changed + +#define EC_DEVICE_LOST 0x1f +// (IUnknown, 0) +// +// request window notification when the device is available again +// (through WM_DEVICECHANGED messages registered with +// RegisterDeviceNotification; see IAMDeviceRemoval interface) + +#define EC_STEP_COMPLETE 0x24 +// (BOOL bCacelled, void) +// Step request complete +// if bCancelled is TRUE the step was cancelled. This can happen +// if the application issued some control request or because there +// was a mode change etc etc + +// Event code 25 is reserved for future use. + +#define EC_TIMECODE_AVAILABLE 0x30 +// Sent by filter supporting timecode +// Param1 has a pointer to the sending object +// Param2 has the device ID of the sending object + +#define EC_EXTDEVICE_MODE_CHANGE 0x31 +// Sent by filter supporting IAMExtDevice +// Param1 has the new mode +// Param2 has the device ID of the sending object + +#define EC_STATE_CHANGE 0x32 +// ( FILTER_STATE, BOOL bInternal) +// Used to notify the application of any state changes in the filter graph. +// lParam1 is of type enum FILTER_STATE (defined in strmif.h) and indicates +// the state of the filter graph. +// +// lParam2 == 0 indicates that the previous state change request has completed +// & a change in application state. +// lParam2 == 1 reserved for future use to indicate internal state changes. + + +#define EC_GRAPH_CHANGED 0x50 +// Sent by filter to notify interesting graph changes + +#define EC_CLOCK_UNSET 0x51 +// ( void, void ) : application +// Used to notify the filter graph to unset the current graph clock. +// Has the affect of forcing the filter graph to reestablish the graph clock +// on the next Pause/Run (note that this is only used by ksproxy, when the pin +// of a clock providing filter is disconnected) + +#define EC_VMR_RENDERDEVICE_SET 0x53 +// (Render_Device type, void) +// Identifies the type of rendering mechanism the VMR +// is using to display video. Types used include: +#define VMR_RENDER_DEVICE_OVERLAY 0x01 +#define VMR_RENDER_DEVICE_VIDMEM 0x02 +#define VMR_RENDER_DEVICE_SYSMEM 0x04 + + +#define EC_VMR_SURFACE_FLIPPED 0x54 +// (hr - Flip return code, void) +// Identifies the VMR's allocator-presenter has called the DDraw flip api on +// the surface being presented. This allows the VMR to keep its DX-VA table +// of DDraw surfaces in sync with DDraws flipping chain. + +#define EC_VMR_RECONNECTION_FAILED 0x55 +// (hr - ReceiveConnection return code, void) +// Identifies that an upstream decoder tried to perform a dynamic format +// change and the VMR was unable to accept the new format. + + +#define EC_PREPROCESS_COMPLETE 0x56 +// Sent by the WM ASF writer filter (WMSDK V9 version) to signal the completion +// of a pre-process run when running in multipass encode mode. +// Param1 = 0, Param2 = IBaseFilter ptr of sending filter + +#define EC_CODECAPI_EVENT 0x57 +// Sent by the Codec API when an event is encountered. Both the Data +// must be freed by the recipient using CoTaskMemFree +// Param1 = UserDataPointer, Param2 = VOID* Data + +//------------------------------------------ +// +// BDA events: +// +// Event code 0x80 through 0x8f are reserved for BDA +// + + +//------------------------------------------ +// +// WindowsMedia SDK filter-specific events: +// +// +// Note that for EC_WMT_EVENT events the wmsdk-based filters use the following structure for +// passing event parameters to the app: +#ifndef AM_WMT_EVENT_DATA_DEFINED +#define AM_WMT_EVENT_DATA_DEFINED +typedef struct { + HRESULT hrStatus; // status code + void * pData; // event data +} AM_WMT_EVENT_DATA; +#endif +// +#define EC_WMT_EVENT_BASE 0x0251 +// +#define EC_WMT_INDEX_EVENT EC_WMT_EVENT_BASE +// WindowsMedia SDK-originated file indexing status, sent by WMSDK-based filters +// +// lParam1 is one of the enum WMT_STATUS messages listed below, sent by the WindowsMedia SDK +// lParam2 is specific to the lParam event +// +// the following WMT_STATUS messages are sent for this event: +// WMT_STARTED - lParam2 is 0 +// WMT_CLOSED - lParam2 is 0 +// WMT_INDEX_PROGRESS - lParam2 is a DWORD containing the progress percent complete +// +#define EC_WMT_EVENT EC_WMT_EVENT_BASE+1 +// WindowsMedia SDK-originated event, sent by WMSDK-based filters +// +// lParam1 is one of the enum WMT_STATUS messages listed below, sent by the WindowsMedia SDK +// lParam2 is a pointer an AM_WMT_EVENT_DATA structure where, +// hrStatus is the status code sent by the wmsdk +// pData is specific to the lParam1 event +// +// the following WMT_STATUS messages are sent by the WMSDK Reader filter for this event: +// WMT_NO_RIGHTS - pData is a pointer to a WCHAR string containing a challenge URL +// WMT_ACQUIRE_LICENSE - lParam2 is a pointer to a WM_GET_LICENSE_DATA struct +// WMT_NO_RIGHTS_EX - lParam2 is a pointer to a WM_GET_LICENSE_DATA struct +// WMT_NEEDS_INDIVIDUALIZATION - lParam2 is NULL +// WMT_INDIVIDUALIZE - lParam2 is a pointer to a WM_INDIVIDUALIZE_STATUS struct +// the WMSDK (V9) ASF Writer filter will send this event in response to a wmsdk-signaled error during file +// writing, along with the wmsdk WMT_STATUS error as the lParam1 and hrStatus embedded in the +// AM_WMT_EVENT_DATA struct pointed to by the lParam2 pointer. +// +// end WMSDK-originated events +//----------------------------------------- + + +#define EC_BUILT 0x300 +// Sent to notify transition from unbuilt to built state + + +#define EC_UNBUILT 0x301 +// Sent to notify transtion from built to unbuilt state -- cgit v1.2.3