1 files changed, 1027 insertions, 0 deletions

diff --git a/sdk/dx8sdk/Include/d3dxcore.h b/sdk/dx8sdk/Include/d3dxcore.h
new file mode 100644
index 00000000..da1e9893
--- /dev/null
+++ b/sdk/dx8sdk/Include/d3dxcore.h
@@ -0,0 +1,1027 @@
+///////////////////////////////////////////////////////////////////////////
+//
+//  Copyright (C) Microsoft Corporation.  All Rights Reserved.
+//
+//  File:       d3dxcore.h
+//  Content:    D3DX core types and functions
+//
+///////////////////////////////////////////////////////////////////////////
+
+#ifndef __D3DXCORE_H__
+#define __D3DXCORE_H__
+
+#include <d3d.h>
+#include <limits.h>
+#include "d3dxerr.h"
+
+
+typedef struct ID3DXContext *LPD3DXCONTEXT;
+
+// {9B74ED7A-BBEF-11d2-9F8E-0000F8080835}
+DEFINE_GUID(IID_ID3DXContext, 
+     0x9b74ed7a, 0xbbef, 0x11d2, 0x9f, 0x8e, 0x0, 0x0, 0xf8, 0x8, 0x8, 0x35);
+
+
+///////////////////////////////////////////////////////////////////////////
+// Defines and Enumerators used below:
+///////////////////////////////////////////////////////////////////////////
+
+//-------------------------------------------------------------------------
+// D3DX_DEFAULT:
+// ---------
+// A predefined value that could be used for any parameter in D3DX APIs or 
+// member functions that is an enumerant or a handle.  The D3DX 
+// documentation indicates wherever D3DX_DEFAULT may be used, 
+// and how it will be interpreted in each situation.
+//-------------------------------------------------------------------------
+#define D3DX_DEFAULT ULONG_MAX
+                            
+//-------------------------------------------------------------------------
+// D3DX_DEFAULT_FLOAT:
+// ------------------
+// Similar to D3DX_DEFAULT, but used for floating point parameters.
+// The D3DX documentation indicates wherever D3DX_DEFAULT_FLOAT may be used, 
+// and how it will be interpreted in each situation.
+//-------------------------------------------------------------------------
+#define D3DX_DEFAULT_FLOAT FLT_MAX
+                            
+//-------------------------------------------------------------------------
+// Hardware Acceleration Level:
+// ---------------------------
+// These constants represent pre-defined hardware acceleration levels,
+// and may be used as a default anywhere a (DWORD) deviceIndex is required.
+// Each pre-define indicates a different level of hardware acceleration.
+// They are an alternative to using explicit deviceIndices retrieved by
+// D3DXGetDeviceDescription().
+//
+// The only case these pre-defines should be used as device indices is if
+// a particular level of acceleration is required, and given more than 
+// one capable device on the computer, it does not matter which one
+// is used.
+//
+// The method of selection is as follows: If one of the D3DX devices on 
+// the primary DDraw device supports a requested hardware acceleration 
+// level, it will be used. Otherwise, the first matching device discovered 
+// by D3DX will be used.  
+//
+// Of course, it is possible for no match to exist for any of the
+// pre-defines on a particular computer.  Passing such a value into the
+// D3DX apis will simply cause them to fail, reporting that no match
+// is available.
+// 
+// D3DX_HWLEVEL_NULL:      Null implementation (draws nothing)
+// D3DX_HWLEVEL_REFERENCE: Reference implementation (slowest)
+// D3DX_HWLEVEL_2D:        2D acceleration only (RGB rasterizer used)
+// D3DX_HWLEVEL_RASTER:    Rasterization acceleration (likely most useful)
+// D3DX_HWLEVEL_TL:        Transform and lighting acceleration 
+// D3DX_DEFAULT:           The highest level of acceleration available
+//                         on the primary DDraw device.
+//-------------------------------------------------------------------------
+#define D3DX_HWLEVEL_NULL       (D3DX_DEFAULT - 1)
+#define D3DX_HWLEVEL_REFERENCE  (D3DX_DEFAULT - 2)
+#define D3DX_HWLEVEL_2D         (D3DX_DEFAULT - 3) 
+#define D3DX_HWLEVEL_RASTER     (D3DX_DEFAULT - 4) 
+#define D3DX_HWLEVEL_TL         (D3DX_DEFAULT - 5) 
+
+//-------------------------------------------------------------------------
+// Surface Class:
+// -------------
+// These are the various types of 2D-surfaces classified according to their
+// usage. Note that a number of them overlap. e.g. STENCILBUFFERS and 
+// DEPTHBUFFERS overlap (since in DX7 implementation the stencil and depth
+// bits are part of the same pixel format).
+//
+// Mapping to the DX7 DDPIXELFORMAT concepts:
+// -----------------------------------------
+// D3DX_SC_DEPTHBUFFER:    All ddpfs which have the DDPF_ZPIXELS or the
+//                           DDPF_ZBUFFER flags set.
+// D3DX_SC_STENCILBUFFER:  All ddpfs which have the DDPF_STENCILBUFFER 
+//                          flag set.
+// D3DX_SC_BUMPMAP:        All ddpfs which have the DDPF_BUMPLUMINANCE 
+//                           or the DDPF_BUMPDUDV flags set.
+// D3DX_SC_LUMINANCEMAP:   All ddpfs which have the DDPF_BUMPLUMINANCE
+//                           or the DDPF_LUMINANCE flags set.
+// D3DX_SC_COLORTEXTURE:   All the surfaces that have color information in
+//                           them and can be used for texturing.
+// D3DX_SC_COLORRENDERTGT: All the surfaces that contain color 
+//                           information and can be used as render targets.
+//-------------------------------------------------------------------------
+#define D3DX_SC_DEPTHBUFFER     0x01
+#define D3DX_SC_STENCILBUFFER   0x02
+#define D3DX_SC_COLORTEXTURE    0x04
+#define D3DX_SC_BUMPMAP         0x08
+#define D3DX_SC_LUMINANCEMAP    0x10
+#define D3DX_SC_COLORRENDERTGT  0x20
+
+//-------------------------------------------------------------------------
+// Surface Formats:
+// ---------------
+// These are the various types of surface formats that can be enumerated, 
+// there is no DDPIXELFORMAT structure in D3DX, the enums carry the meaning 
+// (like FOURCCs).
+//
+// All the surface classes are represented here.  
+//
+//-------------------------------------------------------------------------
+typedef enum _D3DX_SURFACEFORMAT
+{
+    D3DX_SF_UNKNOWN    = 0,
+    D3DX_SF_R8G8B8     = 1,
+    D3DX_SF_A8R8G8B8   = 2,
+    D3DX_SF_X8R8G8B8   = 3,
+    D3DX_SF_R5G6B5     = 4,
+    D3DX_SF_R5G5B5     = 5,
+    D3DX_SF_PALETTE4   = 6,
+    D3DX_SF_PALETTE8   = 7,
+    D3DX_SF_A1R5G5B5   = 8,
+    D3DX_SF_X4R4G4B4   = 9,
+    D3DX_SF_A4R4G4B4   =10,
+    D3DX_SF_L8         =11,      // 8 bit luminance-only
+    D3DX_SF_A8L8       =12,      // 16 bit alpha-luminance
+    D3DX_SF_U8V8       =13,      // 16 bit bump map format
+    D3DX_SF_U5V5L6     =14,      // 16 bit bump map format with luminance
+    D3DX_SF_U8V8L8     =15,      // 24 bit bump map format with luminance
+    D3DX_SF_UYVY       =16,      // UYVY format (PC98 compliance)
+    D3DX_SF_YUY2       =17,      // YUY2 format (PC98 compliance)
+    D3DX_SF_DXT1       =18,      // S3 texture compression technique 1
+    D3DX_SF_DXT3       =19,      // S3 texture compression technique 3
+    D3DX_SF_DXT5       =20,      // S3 texture compression technique 5
+    D3DX_SF_R3G3B2     =21,      // 8 bit RGB texture format
+    D3DX_SF_A8         =22,      // 8 bit alpha-only
+    D3DX_SF_TEXTUREMAX =23,      // Last texture format
+
+    D3DX_SF_Z16S0      =256,
+    D3DX_SF_Z32S0      =257,
+    D3DX_SF_Z15S1      =258,
+    D3DX_SF_Z24S8      =259,
+    D3DX_SF_S1Z15      =260,
+    D3DX_SF_S8Z24      =261,
+    D3DX_SF_DEPTHMAX   =262,     // Last depth format
+
+    D3DX_SF_FORCEMAX  = (DWORD)(-1)
+} D3DX_SURFACEFORMAT;
+
+//-------------------------------------------------------------------------
+// Filtering types for Texture APIs 
+//
+// -------------
+// These are the various filter types for generation of mip-maps 
+//
+// D3DX_FILTERTYPE
+// -----------------------------------------
+// D3DX_FT_POINT:   Point sampling only - no filtering
+// D3DX_FT_LINEAR:  Bi-linear filtering
+//
+//-------------------------------------------------------------------------
+typedef enum _D3DX_FILTERTYPE
+{
+    D3DX_FT_POINT    = 0x01,
+    D3DX_FT_LINEAR   = 0x02,
+    D3DX_FT_DEFAULT  = D3DX_DEFAULT
+} D3DX_FILTERTYPE;
+
+///////////////////////////////////////////////////////////////////////////
+// Structures used below:
+///////////////////////////////////////////////////////////////////////////
+
+//-------------------------------------------------------------------------
+// D3DX_VIDMODEDESC: Display mode description.
+// ----------------
+// width:       Screen Width 
+// height:      Screen Height
+// bpp:         Bits per pixel
+// refreshRate: Refresh rate
+//-------------------------------------------------------------------------
+typedef struct  _D3DX_VIDMODEDESC
+{
+    DWORD width;
+    DWORD height;
+    DWORD bpp;
+    DWORD refreshRate;
+} D3DX_VIDMODEDESC;
+
+//-------------------------------------------------------------------------
+// D3DX_DEVICEDESC: Description of a device that can do 3D
+// ---------------
+// deviceIndex:   Unique (DWORD) number for the device.
+// hwLevel:       Level of acceleration afforded.  This is one of the
+//                predefined Device Indices, and exists in this
+//                structure for informational purposes only.  More than
+//                one device on the system may have the same hwLevel.
+//                To refer to a particular device with the D3DX apis,
+//                use the value in the deviceIndex member instead.
+// ddGuid:        The ddraw GUID
+// d3dDeviceGuid: Direct3D Device GUID
+// ddDeviceID:    DDraw's GetDeviceIdentifier GUID.  This GUID is unique to
+//                a particular driver revision on a particular video card.
+// driverDesc:    String describing the driver
+// monitor:       Handle to the video monitor used by this device (multimon
+//                specific).  Devices that use different monitors on a 
+//                multimon system report different values in this field.
+//                Therefore, to test for a multimon system, an application 
+//                should look for more than one different monitor handle in 
+//                the list of D3DX devices.
+// onPrimary:     Indicates if this device is on the primary monitor
+//                (multimon specific).
+//-------------------------------------------------------------------------
+#define D3DX_DRIVERDESC_LENGTH    256
+
+typedef struct _D3DX_DEVICEDESC
+{
+    DWORD       deviceIndex;  
+    DWORD       hwLevel;
+    GUID        ddGuid;       
+    GUID        d3dDeviceGuid;   
+    GUID        ddDeviceID;      
+    char        driverDesc[D3DX_DRIVERDESC_LENGTH];          
+    HMONITOR    monitor;
+    BOOL        onPrimary;
+} D3DX_DEVICEDESC;
+
+///////////////////////////////////////////////////////////////////////////
+// APIs:
+///////////////////////////////////////////////////////////////////////////
+#ifdef __cplusplus
+extern "C" {
+#endif //__cplusplus
+    
+//-------------------------------------------------------------------------
+// D3DXInitialize: The very first call a D3DX app must make.
+//-------------------------------------------------------------------------
+HRESULT WINAPI
+    D3DXInitialize();
+
+//-------------------------------------------------------------------------
+// D3DXUninitialize: The very last call a D3DX app must make.
+//-------------------------------------------------------------------------
+HRESULT WINAPI
+    D3DXUninitialize();
+
+//-------------------------------------------------------------------------
+// D3DXGetDeviceCount: Returns the maximum number of D3DXdevices 
+// ------------------  available.
+//
+// D3DXGetDeviceDescription: Lists the 2D and 3D capabilities of the devices. 
+// ------------------------  Also, the various guids needed by ddraw and d3d.
+//
+// Params: 
+//     [in] DWORD deviceIndex: Which device? Starts at 0.
+//     [in] D3DX_DEVICEDESC* pd3dxDevice: Pointer to the D3DX_DEVICEDESC
+//                                        structure to be filled in.
+//-------------------------------------------------------------------------
+DWORD WINAPI 
+    D3DXGetDeviceCount();
+
+HRESULT WINAPI
+    D3DXGetDeviceDescription(DWORD            deviceIndex, 
+                             D3DX_DEVICEDESC* pd3dxDeviceDesc);
+
+//-------------------------------------------------------------------------
+// D3DXGetMaxNumVideoModes: Returns the maximum number of video-modes .
+// -----------------------  
+//
+// Params:
+//     [in]  DWORD deviceIndex: The device being referred to.
+//     [in]  DWORD flags: If D3DX_GVM_REFRESHRATE is set, then the refresh
+//                        rates are not ignored.
+//
+// D3DXGetVideoMode:  Describes a particular video mode for this device
+// ----------------
+//
+// Note:  These queries will simply give you a list of modes that the
+//        display adapter tells DirectX that it supports.
+//        There is no guarantee that D3DXCreateContext(Ex) will succeed 
+//        with all listed video modes.  This is a fundamental limitation 
+//        of the current DirectX architecture which D3DX cannot hide in 
+//        any clean way.
+//
+// Params:
+//     [in]  DWORD deviceIndex: The device being referred to.
+//     [in]  DWORD flags: If D3DX_GVM_REFRESHRATE is set, then the refresh
+//                        rates are returned
+//     [in]  DWORD which: Which VideoMode ? Starts at 0.
+//     [out] D3DX_VIDMODEDESC* pModeList: Pointer to the D3DX_VIDMODEDESC
+//                        structure that will be filled in.
+//-------------------------------------------------------------------------
+DWORD WINAPI 
+    D3DXGetMaxNumVideoModes(DWORD       deviceIndex, 
+                            DWORD       flags);
+
+HRESULT WINAPI
+    D3DXGetVideoMode(DWORD             deviceIndex, 
+                     DWORD             flags, 
+                     DWORD             modeIndex, 
+                     D3DX_VIDMODEDESC* pModeDesc);
+
+#define D3DX_GVM_REFRESHRATE      0x00000001
+//-------------------------------------------------------------------------
+// D3DXGetMaxSurfaceFormats: Returns the maximum number of surface
+// ------------------------  formats supported by the device at that
+//                           video mode.
+//
+// D3DXGetSurfaceFormat: Describes one of the supported surface formats.
+// --------------------- 
+//
+// Params:
+//     [in]  DWORD  deviceIndex: The device being referred to.
+//     [in]  D3DX_VIDMODEDESC* pDesc: The display mode at which the supported
+//                                    surface formats are requested. If it is
+//                                    NULL, the current display mode is 
+//                                    assumed.
+//     [in]  DWORD surfClassFlags: Required surface classes.  Only surface
+//                                 formats which support all specified 
+//                                 surface classes will be returned.  
+//                                 (Multiple surface classes may be specified
+//                                 using bitwise OR.) 
+//     [in]  DWORD which: Which surface formats to retrieve. Starts at 0.
+//     [out] D3DX_SURFACEFORMAT* pFormat: The surface format
+//-------------------------------------------------------------------------
+DWORD WINAPI 
+    D3DXGetMaxSurfaceFormats(DWORD             deviceIndex, 
+                             D3DX_VIDMODEDESC* pDesc,
+                             DWORD             surfClassFlags);
+HRESULT WINAPI
+    D3DXGetSurfaceFormat(DWORD               deviceIndex,
+                         D3DX_VIDMODEDESC*   pDesc,
+                         DWORD               surfClassFlags,                   
+                         DWORD               surfaceIndex, 
+                         D3DX_SURFACEFORMAT* pFormat);
+
+
+//-------------------------------------------------------------------------
+// D3DXGetCurrentVideoMode: Retrieves the current video mode for this device.
+// -------------------
+//
+// Params:
+//     [in]  DWORD deviceIndex: The device being referred to.
+//     [out] D3DX_VIDMODEDESC* pVidMode: The current video mode
+//-------------------------------------------------------------------------
+HRESULT WINAPI
+    D3DXGetCurrentVideoMode(DWORD             deviceIndex, 
+                            D3DX_VIDMODEDESC* pVidMode);
+
+//-------------------------------------------------------------------------
+// D3DXGetDeviceCaps: Lists all the capabilities of a device at a display 
+//                    mode.
+// ----------------
+//
+// Params:
+//     [in]  DWORD  deviceIndex: The device being referred to.
+//     [in]  D3DX_VIDMODEDESC* pDesc:  If this is NULL, we will return the 
+//                                     caps at the current display mode of 
+//                                     the device.
+//     [out] D3DDEVICEDESC7* pD3DDeviceDesc7: D3D Caps ( NULL to ignore 
+//                                              parameter)
+//     [out] DDCAPS7* pDDHalCaps: DDraw HAL Caps (NULL to ignore parameter)
+//     [out] DDCAPS7* pDDHelCaps: DDraw HEL Caps (NULL to ignore  paramter)
+//-------------------------------------------------------------------------
+HRESULT WINAPI
+    D3DXGetDeviceCaps(DWORD             deviceIndex, 
+                      D3DX_VIDMODEDESC* pVidMode,
+                      D3DDEVICEDESC7*   pD3DCaps,
+                      DDCAPS*           pDDHALCaps,
+                      DDCAPS*           pDDHELCaps);
+
+//-------------------------------------------------------------------------
+// D3DXCreateContext: Initializes the chosen device. It is the simplest init
+// -----------------  function available.  Parameters are treated the same
+//                    as the matching subset of parameters in 
+//                    D3DXCreateContextEx, documented below.
+//                    Remaining D3DXCreateContextEx parameters that are
+//                    not present in D3DXCreateContext are treated as
+//                    D3DX_DEFAULT.  Note that multimon is not supported
+//                    with D3DXCreateContext.
+//
+// D3DXCreateContextEx: A more advanced function to initialize the device.
+// -------------------  Also accepts D3DX_DEFAULT for most of the parameters
+//                      and then will do what D3DXCreateContext did.
+//
+// Note: Do not expect D3DXCreateContext(Ex) to be fail-safe (as with any
+//       API).  Supported device capablilites should be used as a guide
+//       for choosing parameter values.  Keep in mind that there will 
+//       inevitably be some combinations of parameters that just do not work.
+// 
+// Params:
+//     [in]  DWORD deviceIndex: The device being referred to.   
+//     [in]  DWORD flags: The valid flags are D3DX_CONTEXT_FULLSCREEN, and
+//                        D3DX_CONTEXT_OFFSCREEN.  These flags cannot both
+//                        be specified.  If no flags are specified, the
+//                        context defaults to windowed mode.
+//
+//     [in]  HWND  hwnd: Device window.  See note.
+//     [in]  HWND  hwndFocus: Window which receives keyboard messages from 
+//                            the device window.  The device window should be 
+//                            a child of focus window.  Useful for multimon 
+//                            applications.  See note.
+//     NOTE: 
+//         windowed:   
+//             hwnd must be a valid window.  hwndFocus must be NULL or 
+//             D3DX_DEFAULT.
+//
+//         fullscreen: 
+//             Either hwnd or hwndFocus must be a valid window.  (Both cannot
+//             be NULL or D3DX_DEFAULT).  If hwnd is NULL or D3DX_DEFAULT, 
+//             a default device window will be created as a child of hwndFocus.
+//
+//         offscreen:
+//             Both hwnd and hwndFocus must be NULL or D3DX_DEFAULT
+//
+//     [in]  DWORD numColorBits: If D3DX_DEFAULT is passed for windowed mode,
+//                               the current desktop's color depth is chosen.
+//                               For full screen mode, D3DX_DEFAULT causes 16
+//                               bit color to be used.                               
+//     [in]  DWORD numAlphaBits: If D3DX_DEFAULT is passed, 0 is chosen.
+//     [in]  DWORD numDepthbits: If D3DX_DEFAULT is passed,
+//                               the highest available number of depth bits
+//                               is chosen.  See note.
+//     [in]  DWORD numStencilBits: If D3DX_DEFAULT is passed, the highest
+//                                 available number of stencil bits is chosen.
+//                                 See note.
+//
+//     NOTE: If both numDepthBits and numStencilBits are D3DX_DEFAULT,
+//           D3DX first picks the highest available number of stencil
+//           bits.  Then, for the chosen number of stencil bits, 
+//           the highest available number of depth bits is chosen.
+//           If only one of numStencilBits or numDepthBits 
+//           is D3DX_DEFAULT, the highest number of bits available 
+//           for this parameter is chosen out of only the formats
+//           that support the number of bits requested for the
+//           fixed parameter.
+//
+//     [in]  DWORD numBackBuffers: Number of back buffers, or D3DX_DEFAULT.
+//                                 See note.
+//
+//     NOTE:
+//        windowed: D3DX_DEFAULT means 1.  You must specify one back buffer.
+//
+//        fullscreen: D3DX_DEFAULT means 1.  Any number of back buffers can be
+//            specified.
+//
+//        offscreen: D3DX_DEFAULT means 0.  You cannot specify additional back 
+//            buffers.
+//
+//     [in]  DWORD width: Width, in pixels, or D3DX_DEFAULT.  See note.
+//     [in]  DWORD height: Height, in pixels, or D3DX_DEFAULT.  See note.
+//
+//     NOTE: 
+//        windowed: If either width or height is D3DX_DEFAULT, both values
+//            default to the dimensions of the client area of hwnd.
+//
+//        fullscreen: If either width or height is D3DX_DEFAULT, width 
+//            defaults to 640, and height defaults to 480.
+//
+//        offscreen: An error is returned if either width or height is 
+//            D3DX_DEFAULT.
+//
+//     [in]  DWORD refreshRate: D3DX_DEFAULT means we let ddraw choose for 
+//                              us.  Ignored for windowed and offscreen modes.
+//     [out] LPD3DXCONTEXT* ppCtx: This is the Context object that is used for
+//                                 rendering on that device.
+//
+//-------------------------------------------------------------------------
+HRESULT WINAPI
+    D3DXCreateContext(DWORD          deviceIndex,  
+                      DWORD          flags,
+                      HWND           hwnd,
+                      DWORD          width, 
+                      DWORD          height,
+                      LPD3DXCONTEXT* ppCtx);
+
+HRESULT WINAPI
+    D3DXCreateContextEx(DWORD          deviceIndex,  
+                        DWORD          flags,
+                        HWND           hwnd,
+                        HWND           hwndFocus, 
+                        DWORD          numColorBits,
+                        DWORD          numAlphaBits,
+                        DWORD          numDepthbits,
+                        DWORD          numStencilBits,
+                        DWORD          numBackBuffers,
+                        DWORD          width, 
+                        DWORD          height,
+                        DWORD          refreshRate,
+                        LPD3DXCONTEXT* ppCtx);
+
+// The D3DXCreateContext(Ex) flags are:
+#define D3DX_CONTEXT_FULLSCREEN  0x00000001
+#define D3DX_CONTEXT_OFFSCREEN   0x00000002
+
+//-------------------------------------------------------------------------
+// D3DXGetErrorString: Prints out the error string given an hresult. Prints
+// ------------------  Win32 as well as DX6 error messages besides the D3DX
+//                     messages.
+//
+// Params:
+//     [in]  HRESULT hr: The error code to be deciphered.
+//     [in]  DWORD strLength: Length of the string passed in.
+//     [out] LPSTR pStr:  The string output. This string of appropriate
+//                       size needs to be passed in.
+//-------------------------------------------------------------------------
+void WINAPI
+    D3DXGetErrorString(HRESULT hr, 
+                       DWORD   strLength, 
+                       LPSTR   pStr);
+
+//-------------------------------------------------------------------------
+// D3DXMakeDDPixelFormat: Fills in a DDPIXELFORMAT structure based on the 
+// ---------------------   D3DX surface format requested.
+//
+// Params:
+//     [in]  D3DX_SURFACEFORMAT d3dxFormat: Surface format.
+//     [out] DDPIXELFORMAT*     pddpf:      Pixel format matching the given
+//                                          surface format.
+//-------------------------------------------------------------------------
+HRESULT WINAPI
+    D3DXMakeDDPixelFormat(D3DX_SURFACEFORMAT d3dxFormat, 
+                          DDPIXELFORMAT*     pddpf);
+
+//-------------------------------------------------------------------------
+// D3DXMakeSurfaceFormat: Determines the surface format corresponding to 
+// ---------------------  a given DDPIXELFORMAT. 
+//
+// Params:
+//     [in]  DDPIXELFORMAT* pddpf: Pixel format.
+// Return Value:
+//     D3DX_SURFACEFORMAT: Surface format matching the given pixel format.
+//                         D3DX_SF_UNKNOWN if the format is not supported
+//-------------------------------------------------------------------------
+D3DX_SURFACEFORMAT WINAPI
+    D3DXMakeSurfaceFormat(DDPIXELFORMAT* pddpf);
+
+#ifdef __cplusplus
+}
+#endif //__cplusplus    
+
+///////////////////////////////////////////////////////////////////////////
+// Interfaces:
+///////////////////////////////////////////////////////////////////////////
+
+//-------------------------------------------------------------------------
+// ID3DXContext interface: 
+//
+// This encapsulates all the stuff that the app might 
+// want to do at initialization time and any global control over d3d and 
+// ddraw.
+//-------------------------------------------------------------------------
+
+
+DECLARE_INTERFACE_(ID3DXContext, IUnknown)
+{
+    //
+    // IUnknown methods 
+    //
+    STDMETHOD(QueryInterface)(THIS_ REFIID riid, LPVOID* ppvObj) PURE;
+    STDMETHOD_(ULONG,AddRef)(THIS) PURE;
+    STDMETHOD_(ULONG,Release)(THIS) PURE;
+
+    // Get the DDraw and Direct3D objects to call DirectDraw or
+    // Direct3D Immediate Mode functions. 
+    // If the objects don't exist (because they have not
+    // been created for some reason) NULL is returned.
+    // All the objects returned in the following Get* functions
+    // are addref'ed. It is the application's responsibility to
+    // release them when no longer needed.
+    STDMETHOD_(LPDIRECTDRAW7,GetDD)(THIS) PURE;
+    STDMETHOD_(LPDIRECT3D7,GetD3D)(THIS) PURE;
+    STDMETHOD_(LPDIRECT3DDEVICE7,GetD3DDevice)(THIS) PURE;
+
+    // Get the various buffers that get created at the init time
+    // These are addref'ed as well. It is the application's responsibility
+    // to release them before the app quits or when it needs a resize.
+    STDMETHOD_(LPDIRECTDRAWSURFACE7,GetPrimary)(THIS) PURE;
+    STDMETHOD_(LPDIRECTDRAWSURFACE7,GetZBuffer)(THIS) PURE;
+    STDMETHOD_(LPDIRECTDRAWSURFACE7,GetBackBuffer)(THIS_ DWORD which) PURE;
+
+    // Get the associated window handles 
+    STDMETHOD_(HWND,GetWindow)(THIS) PURE;
+    STDMETHOD_(HWND,GetFocusWindow)(THIS) PURE;
+
+    // 
+    // Various Get methods, in case the user had specified default
+    // parameters
+    //
+    STDMETHOD(GetDeviceIndex)(THIS_ 
+                              LPDWORD pDeviceIndex, 
+                              LPDWORD pHwLevel) PURE;
+
+    STDMETHOD_(DWORD, GetNumBackBuffers)(THIS) PURE;
+
+    STDMETHOD(GetNumBits)(THIS_
+                          LPDWORD pColorBits, 
+                          LPDWORD pDepthBits,
+                          LPDWORD pAlphaBits, 
+                          LPDWORD pStencilBits) PURE;
+
+    STDMETHOD(GetBufferSize)(THIS_ 
+                             LPDWORD pWidth, 
+                             LPDWORD pHeight) PURE;
+
+    // Get the flags that were used to create this context
+    STDMETHOD_(DWORD, GetCreationFlags)(THIS) PURE;
+    STDMETHOD_(DWORD, GetRefreshRate)(THIS) PURE;
+    
+    // Restoring surfaces in case stuff is lost
+    STDMETHOD(RestoreSurfaces)(THIS) PURE;
+    
+    // Resize all the buffers to the new width and height
+    STDMETHOD(Resize)(THIS_ DWORD width, DWORD height) PURE;
+
+    // Update the frame using a flip or a blit,
+    // If the D3DX_UPDATE_NOVSYNC flag is set, blit is used if the 
+    // driver cannot flip without waiting for vsync in full-screen mode.
+    STDMETHOD(UpdateFrame)(THIS_ DWORD flags) PURE;
+
+    // Render a string at the specified coordinates, with the specified 
+    // colour. This is only provided as a convenience for 
+    // debugging/information during development.
+    // topLeftX and topLeftY represent the location of the top left corner
+    // of the string, on the render target.  
+    // The coordinate and color parameters each have a range of 0.0-1.0
+    STDMETHOD(DrawDebugText)(THIS_
+                             float topLeftX, 
+                             float topLeftY,
+                             D3DCOLOR color,
+                             LPSTR pString) PURE;
+
+    // Clears to the current viewport
+    // The following are the valid flags:
+    // D3DCLEAR_TARGET  (to clear the render target )
+    // D3DCLEAR_ZBUFFER (to clear the depth-buffer )
+    // D3DCLEAR_STENCIL (to clear the stencil-buffer )
+    STDMETHOD(Clear)(THIS_ DWORD ClearFlags) PURE;
+
+    STDMETHOD(SetClearColor)(THIS_ D3DCOLOR color ) PURE;
+    STDMETHOD(SetClearDepth)(THIS_ float z) PURE;
+    STDMETHOD(SetClearStencil)(THIS_ DWORD stencil) PURE;
+};
+
+
+//-------------------------------------------------------------------------
+// Flags for Update member function:
+//
+
+// Flag to indicate that blit should be used instead of a flip
+// for full-screen rendering.
+#define D3DX_UPDATE_NOVSYNC (1<<0)
+
+///////////////////////////////////////////////////////////////////////////
+// Texturing APIs:
+///////////////////////////////////////////////////////////////////////////
+#ifdef __cplusplus
+extern "C" {
+#endif //__cplusplus
+    
+//-------------------------------------------------------------------------
+// D3DXCheckTextureRequirements: Return information about texture creation 
+// ----------------------------  (used by CreateTexture, CreateTextureFromFile
+//                                and CreateCubeMapTexture)
+//
+// Parameters:
+//
+//  pd3dDevice
+//      The D3D device with which the texture is going to be used.
+//  pFlags   
+//      allows specification of D3DX_TEXTURE_NOMIPMAP
+//      D3DX_TEXTURE_NOMIPMAP may be returned in the case where mipmap creation 
+//      is not supported.
+//  pWidth
+//      width in pixels or NULL 
+//      returns corrected width
+//  pHeight       
+//      height in pixels or NULL
+//      returns corrected height
+//  pPixelFormat
+//      surface format 
+//      returns best match to input format
+//
+//  Notes: 1. Unless the flags is set to specifically prevent creating 
+//            mipmaps, mipmaps are generated all the way till 1x1 surface.
+//         2. width, height and pixelformat are altered based on available 
+//            hardware. For example:
+//              a. Texture dimensions may be required to be powers of 2
+//              b. We may require width == height for some devices
+//              c. If PixelFormat is unavailable, a best fit is made
+//-------------------------------------------------------------------------
+HRESULT WINAPI 
+    D3DXCheckTextureRequirements( LPDIRECT3DDEVICE7     pd3dDevice,
+                                  LPDWORD               pFlags, 
+                                  LPDWORD               pWidth,  
+                                  LPDWORD               pHeight,  
+                                  D3DX_SURFACEFORMAT*   pPixelFormat);
+
+//-------------------------------------------------------------------------
+// D3DXCreateTexture: Create an empty texture object
+// -----------------
+//
+// Parameters:
+//
+//  pd3dDevice
+//      The D3D device with which the texture is going to be used.
+//  pFlags   
+//      allows specification of D3DX_TEXTURE_NOMIPMAP
+//      D3DX_TEXTURE_NOMIPMAP may be returned in the case where mipmap creation 
+//      is not supported. Additionally, D3DX_TEXTURE_STAGE<n> can be specified
+//      to indicate which texture stage the texture is for e.g. 
+//      D3D_TEXTURE_STAGE1 indicates that the texture is for use with texture 
+//      stage one. Stage Zero is the default if no TEXTURE_STAGE flags are
+//      set.
+//  pWidth
+//      width in pixels; 0 or NULL is unacceptable
+//      returns corrected width
+//  pHeight       
+//      height in pixels; 0 or NULL is unacceptable
+//      returns corrected height
+//  pPixelFormat
+//      surface format. D3DX_DEFAULT is unacceptable.
+//      returns actual format that was used
+//  pDDPal
+//      DDraw palette that is set (if present) on paletted surfaces.
+//      It is ignored even if it is set, for non-paletted surfaces.
+//  ppDDSurf
+//      The ddraw surface that will be created
+//  pNumMipMaps
+//      the number of mipmaps actually generated
+//
+//  Notes: See notes for D3DXCheckTextureRequirements. 
+//-------------------------------------------------------------------------
+HRESULT WINAPI 
+    D3DXCreateTexture( LPDIRECT3DDEVICE7     pd3dDevice,
+                       LPDWORD               pFlags, 
+                       LPDWORD               pWidth,  
+                       LPDWORD               pHeight,  
+                       D3DX_SURFACEFORMAT*   pPixelFormat,
+                       LPDIRECTDRAWPALETTE   pDDPal,
+                       LPDIRECTDRAWSURFACE7* ppDDSurf,
+                       LPDWORD               pNumMipMaps);
+
+//-------------------------------------------------------------------------
+// D3DXCreateCubeMapTexture: Create blank cube-map texture
+// ------------------------
+//
+// Parameters:
+//
+//  pd3dDevice
+//      The D3D device with which the texture is going to be used.
+//  pFlags   
+//      allows specification of D3DX_TEXTURE_NOMIPMAP
+//      D3DX_TEXTURE_NOMIPMAP may be returned in the case where mipmap creation 
+//      is not supported. Additionally, D3DX_TEXTURE_STAGE<n> can be specified
+//      to indicate which texture stage the texture is for e.g. 
+//      D3D_TEXTURE_STAGE1 indicates that the texture is for use with texture 
+//      stage one. Stage Zero is the default if no TEXTURE_STAGE flags are
+//      set.
+//  cubefaces
+//      allows specification of which faces of the cube-map to generate.
+//      D3DX_DEFAULT, 0, and DDSCAPS2_CUBEMAP_ALLFACES all mean
+//      "create all 6 faces of the cubemap". Any combination of
+//      DDSCAPS2_CUBEMAP_POSITIVEX, DDSCAPS2_CUBEMAP_NEGATIVEX,
+//      DDSCAPS2_CUBEMAP_POSITIVEY, DDSCAPS2_CUBEMAP_NEGATIVEY,
+//      DDSCAPS2_CUBEMAP_POSITIVEZ, or DDSCAPS2_CUBEMAP_NEGATIVEZ, is
+//      valid.
+//  colorEmptyFaces
+//      allows specification of the color to use for the faces that were not
+//      specified in the cubefaces parameter.
+//  pWidth
+//      width in pixels; 0 or NULL is unacceptable
+//      returns corrected width
+//  pHeight       
+//      height in pixels; 0 or NULL is unacceptable
+//      returns corrected height
+//  pPixelFormat
+//      surface format. D3DX_DEFAULT is unacceptable.
+//      returns actual format that was used
+//  pDDPal
+//      DDraw palette that is set (if present) on paletted surfaces.
+//      It is ignored even if it is set, for non-paletted surfaces.
+//  ppDDSurf
+//      the ddraw surface that will be created
+//  pNumMipMaps
+//      the number of mipmaps generated for a particular face of the 
+//      cubemap.
+//
+//  Notes: See notes for D3DXCheckTextureRequirements. 
+//-------------------------------------------------------------------------
+HRESULT WINAPI 
+    D3DXCreateCubeMapTexture( LPDIRECT3DDEVICE7     pd3dDevice,
+                              LPDWORD               pFlags, 
+                              DWORD                 cubefaces,
+                              D3DCOLOR              colorEmptyFaces,
+                              LPDWORD               pWidth,  
+                              LPDWORD               pHeight,  
+                              D3DX_SURFACEFORMAT    *pPixelFormat,
+                              LPDIRECTDRAWPALETTE   pDDPal,
+                              LPDIRECTDRAWSURFACE7* ppDDSurf,
+                              LPDWORD               pNumMipMaps);
+
+
+//-------------------------------------------------------------------------
+// D3DXCreateTextureFromFile: Create a texture object from a file or from the 
+// -------------------------  resource. Only BMP and DIB are supported from the
+//                            resource portion of the executable.
+//
+// Parameters:
+//
+//  pd3dDevice
+//      The D3D device with which the texture is going to be used.
+//  pFlags   
+//      allows specification of D3DX_TEXTURE_NOMIPMAP
+//      D3DX_TEXTURE_NOMIPMAP may be returned in the case where mipmap creation 
+//      is not supported. Additionally, D3DX_TEXTURE_STAGE<n> can be specified
+//      to indicate which texture stage the texture is for e.g. 
+//      D3D_TEXTURE_STAGE1 indicates that the texture is for use with texture 
+//      stage one. Stage Zero is the default if no TEXTURE_STAGE flags are
+//      set.
+//  pWidth  
+//      Width in pixels. If 0 or D3DX_DEFAULT, the width will be taken 
+//      from the file
+//      returns corrected width
+//  pHeight   
+//      Height in pixels. If 0 or D3DX_DEFAULT, the height will be taken 
+//      from the file
+//      returns corrected height
+//  pPixelFormat
+//      If D3DX_SF_UNKNOWN is passed in, pixel format closest to the bitmap 
+//      will be chosen
+//      returns actual format that was used
+//  pDDPal
+//      DDraw palette that is set (if present) on paletted surfaces.
+//      It is ignored even if it is set, for non-paletted surfaces.
+//  ppDDSurf
+//      The ddraw surface that will be created.
+//  pNumMipMaps
+//      The number of mipmaps generated.
+//  pSrcName
+//      File name. BMP, DIB, DDS, are supported. 
+//      
+//      TGA is supported for the following cases: 16, 24, 32bpp direct color and 8bpp palettized. 
+//      Also, 8, 16bpp grayscale is supported. RLE versions of the above 
+//      TGA formats are also supported. ColorKey and Premultiplied Alpha 
+//      are not currently supported for TGA files.
+//      returns created format
+//
+//  Notes: See notes for D3DXCheckTextureRequirements. 
+//-------------------------------------------------------------------------
+HRESULT WINAPI 
+    D3DXCreateTextureFromFile( LPDIRECT3DDEVICE7     pd3dDevice,
+                               LPDWORD               pFlags, 
+                               LPDWORD               pWidth,  
+                               LPDWORD               pHeight,  
+                               D3DX_SURFACEFORMAT*   pPixelFormat,
+                               LPDIRECTDRAWPALETTE   pDDPal,
+                               LPDIRECTDRAWSURFACE7* ppDDSurf,
+                               LPDWORD               pNumMipMaps,
+                               LPSTR                 pSrcName,
+                               D3DX_FILTERTYPE       filterType);
+
+//-------------------------------------------------------------------------
+// D3DXLoadTextureFromFile: Load from a file into a mipmap level. Doing the 
+// -----------------------  necessary color conversion and rescaling. File
+//                          format support is identical to 
+//                          D3DXCreateTextureFromFile's.
+//
+//  pd3dDevice
+//      The D3D device with which the texture is going to be used.
+// pTexture
+//      a pointer to a DD7Surface which was created with either 
+//      CreateTextureFromFile or CreateTexture.
+// mipMapLevel
+//      indicates mipmap level
+//      Note: 
+//          1. Error if mipmap level doesn't exist
+//          2. If D3DX_DEFAULT and equal number of mipmap levels exist
+//             then all the source mip-levels are loaded
+//          3. If the source has mipmaps and the dest doesn't, use the top one
+//          4. If the dest has miplevels and source doesn't, we expand
+//          5. If there are unequal numbers of miplevels, we expand
+// pSrcName
+//      File name. BMP, DIB, DDS, are supported. 
+//      For details on TGA support, refer to the comments for 
+//      D3DXCreateTextureFromFile
+// pSrcRect
+//      the source rectangle or null (whole surface)
+// pDestRect
+//      the destination rectangle or null (whole surface)
+// filterType 
+//      filter used for mipmap generation
+//-------------------------------------------------------------------------
+HRESULT WINAPI 
+    D3DXLoadTextureFromFile( LPDIRECT3DDEVICE7    pd3dDevice,
+                             LPDIRECTDRAWSURFACE7 pTexture,
+                             DWORD                mipMapLevel,
+                             LPSTR                pSrcName, 
+                             RECT*                pSrcRect, 
+                             RECT*                pDestRect,
+                             D3DX_FILTERTYPE      filterType);
+
+//-------------------------------------------------------------------------
+// D3DXLoadTextureFromSurface: Load from a DDraw Surface into a mipmap level. 
+// --------------------------  Doing the necessary color conversion.
+//
+//  pd3dDevice
+//      The D3D device with which the texture is going to be used.
+// pTexture
+//      a pointer to a DD7Surface which was created with either 
+//      CreateTextureFromFile or CreateTexture.
+// mipMapLevel
+//      indicates mipmap level
+//      Note: 
+//          1. Error if mipmap level doesn't exist
+//          2. If D3DX_DEFAULT and equal number of mipmap levels exist
+//             then all the source mip-levels are loaded
+//          3. If the source has mipmaps and the dest doesn't, use the top one
+//          4. If the dest has miplevels and source doesn't, we expand
+//          5. If there are unequal numbers of miplevels, we expand
+// pSurfaceSrc
+//      the source surface
+// pSrcRect
+//      the source rectangle or null (whole surface)
+// pDestRect
+//      the destination rectangle or null (whole surface)
+// filterType 
+//      filter used for mipmap generation
+//-------------------------------------------------------------------------
+HRESULT WINAPI 
+    D3DXLoadTextureFromSurface( LPDIRECT3DDEVICE7    pd3dDevice,
+                                LPDIRECTDRAWSURFACE7 pTexture,
+                                DWORD                mipMapLevel,
+                                LPDIRECTDRAWSURFACE7 pSurfaceSrc, 
+                                RECT*                pSrcRect, 
+                                RECT*                pDestRect,
+                                D3DX_FILTERTYPE      filterType);
+
+//-------------------------------------------------------------------------
+// D3DXLoadTextureFromMemory: Load a mip level from memory. Doing the necessary
+// -------------------------  color conversion.
+//
+//  pd3dDevice
+//      The D3D device with which the texture is going to be used.
+// pTexture
+//      a pointer to a DD7Surface which was created with either 
+//      CreateTextureFromFile or CreateTexture.
+// mipMapLevel
+//      indicates mipmap level
+//      Note: 
+//          1. Error if mipmap level doesn't exist
+//          2. If D3DX_DEFAULT and equal number of mipmap levels exist
+//             then all the source mip-levels are loaded
+//          3. If the source has mipmaps and the dest doesn't, use the top one
+//          4. If the dest has miplevels and source doesn't, we expand
+//          5. If there are unequal numbers of miplevels, we expand
+// pMemory
+//      pointer to source memory from which the texture will be loaded
+// pDDPal
+//      DirectDraw Palette, that the app passes in optionally if the memory is 
+//      supposed to be paletteized.
+// srcPixelFormat
+//      PixelFormat of the source.
+// srcPitch
+//      The pitch of the memory or D3DX_DEFAULT (based on srcPixelFormat)
+// pDestRect
+//      The destination rectangle or null (whole surface)
+// filterType 
+//      filter used for mipmap generation
+// 
+// Assumptions: The source (memory) is loaded in full
+//-------------------------------------------------------------------------
+HRESULT WINAPI 
+    D3DXLoadTextureFromMemory( LPDIRECT3DDEVICE7    pd3dDevice, 
+                               LPDIRECTDRAWSURFACE7 pTexture,
+                               DWORD                mipMapLevel, 
+                               LPVOID               pMemory,
+                               LPDIRECTDRAWPALETTE  pDDPal,
+                               D3DX_SURFACEFORMAT   srcPixelFormat,
+                               DWORD                srcPitch,
+                               RECT*                pDestRect,
+                               D3DX_FILTERTYPE      filterType);
+
+#ifdef __cplusplus
+}
+#endif //__cplusplus    
+
+//-------------------------------------------------------------------------
+// Flags for texture create functions; applies to 
+// D3DXCreateTexture, D3DXCreateCubeMapTexture and D3DXCreateTextureFromFile.
+//
+
+// Flag to indicate that mipmap generation is not desired.
+#define D3DX_TEXTURE_NOMIPMAP  (1 << 8)
+
+// Flags to indicate which texture stage the texture is
+// intended for use with. Specifying the stage is necessary at
+// texture creation time for HW devices that expose the
+// D3DDEVCAPS_SEPARATETEXTUREMEMORIES bit in their D3DDEVICEDESC
+// structure.
+#define D3DX_TEXTURE_STAGE0    (0)
+#define D3DX_TEXTURE_STAGE1    (1)
+#define D3DX_TEXTURE_STAGE2    (2)
+#define D3DX_TEXTURE_STAGE3    (3)
+#define D3DX_TEXTURE_STAGE4    (4)
+#define D3DX_TEXTURE_STAGE5    (5)
+#define D3DX_TEXTURE_STAGE6    (6)
+#define D3DX_TEXTURE_STAGE7    (7)
+
+// Mask to extract the texture stage value out of the flags to
+// the texture create functions.
+#define D3DX_TEXTURE_STAGE_MASK (0x7)
+
+#endif //__D3DXCORE_H__